By Brie Greenhalgh | Updated Oct 19, 2021 4:35 PM

Automatic garage doors have fast become a necessity in the modern world. Homeowners rely on them so much that it’s easy to forget that they eventually wear out and need replacement parts—until they suddenly won’t open. A broken garage door spring is the most common part that needs repair or replacement since it does the heavy lifting each time you use the door. A technician can perform a garage door spring repair for an average cost of $250, but the price could range between $150 and $350. The door size, type and number of springs, number of doors, location, and labor rates will determine the garage door spring replacement cost. Fortunately, a qualified professional can replace broken garage door springs and handle the problem safely; you’ll be back to driving into your garage in no time.

In most cases, if a garage door spring is broken, it will need to be totally replaced rather than repaired. When it’s time to ask about a garage spring replacement cost, the quote should include the cost of labor and materials for the kind of doors you have.

Garage doors are not simple to repair, which is why it’s essential to use a reliable company with several years of experience. Most companies will send two employees to do garage door repairs for safety reasons since garage doors are heavy and unwieldy. Labor rates usually run from $75 to $150 for the service call, according to HomeAdvisor. A reputable company can tell you the approximate time it will take to repair your door when you call for a quote—usually 1 to 2 hours for spring replacement.

Replacing garage door springs means you’ll be paying for new springs, brackets, and hardware to get the garage door working again. These typically cost $30 to $200 for a set of two springs, which is most common for a double garage door. A single door uses only one spring, so it will cost less to repair.

The supply and demand of garage door contractors will influence the total price. If there are fewer companies in the region, expect higher garage door spring replacement costs. In general, repair rates in urban areas tend to be higher since the cost of living is greater than in most suburban or rural areas. On the other hand, you might have to pay an extra trip fee if the technician has to travel a long distance to get to a rural house.

If your garage doors were all installed around the same time, and they’re used with the same frequency, both springs could wear out simultaneously. Most homes have double-door garages that run on two springs to keep the door balanced as it lifts and lowers. When one spring is replaced, the older spring experiences imbalanced tension and will likely break soon afterward. For this reason, it’s recommended to replace both springs at the same time. If you have a third or fourth garage door, ask about a discount to have all the springs replaced simultaneously and avoid an additional service fee a few months later.

Residential garage doors are built using torsion or extension springs that create the force required to lift and lower the garage at a controlled speed. Whether you have a roll-up garage door or a tilt-up door, the cost is calculated by the kind of spring being replaced. A commercial garage door is much larger and heavier than a residential door and is used more frequently than most residential doors, so the springs likely break more often. Commercial garage door springs cost $100 to $500 plus $150 to $300 for labor.

While most garage doors are the sectional style that rolls panels up along tracks, there are other types of garages like tilt-up and single panel. While the styles may be different, they all operate with a spring mechanism to offset the weight of manually lifting and lowering the garage door. Extension springs are the more traditional style, but torsion springs are another option.

Torsion springs are one of the more dangerous springs to replace since they remain under tremendous pressure when the garage is closed. They are attached to the wall on the side of the garage door and expand and twist tightly to operate the door. Torsion springs are stronger than extension springs, so they carry more weight and last longer—between 10,000 and 20,000 cycles or 8 to 15 years, depending on use. Replacement torsion springs cost $30 to $100 each, and replacing them will cost $75 to $150 per spring, including labor and materials.

Extension springs are cheaper than torsion springs, but they last only 8,000 to 15,000 cycles or 7 to 12 years. These are long and skinny and are located just above the door’s horizontal track on a single rod. When the door is lowered, the springs tighten and pressurize to create the spring action needed to raise the door again. They have safety cables attached to keep them in place when they break since they have more exposed parts than torsion springs. Extension springs cost $15 to $45, and replacing them costs around $50 to $100 each, which includes labor and materials.

Garage doors also include cables that work in tandem with the springs to raise and lower the door. They’re also the backup system when the springs fail. The cables could wear out before your spring, so watch for some common signs that your cables need repair: one side is heavier and lifting unevenly, the door whines when moving, or the door came off the track completely. A technician can replace the cables for $75 to $200, but if they are replaced simultaneously with a broken spring, you’ll likely pay $175 to $450.

The labor rates for a double garage door repair are the same as for a single, but the materials will cost more. Double garage door springs are larger than single door springs. For example, if an extension spring costs between $15 and $45, expect to pay $15 to $30 more per spring. The cables are also thicker to accommodate the extra weight, so replacing springs and cables together will cost more.

The cost to replace springs on a roll-up garage door is about the same as any other door since the price is more dependent on the kind of spring being replaced. Most roll-up doors use two torsion springs, so you’ll likely pay $200 to $250. Labor costs for roll-up doors are the same as for any other type of garage door.

Garage door springs can be tuned up to lengthen their lifespans. Have a technician maintain the springs once or twice a year to keep them lubricated and balanced. They’ll also make sure all screws are tightened and that the cables, tracks, drums, and rollers are all in good condition. Tuning up your garage door helps keep it functioning safely for longer, and you can potentially avoid a shock when the garage door breaks. Once a spring breaks, it cannot be repaired, only replaced. Garage door spring replacement costs between $100 and $300 on average, but a garage door tune-up costs $50 to $150.

If you weren’t already home to hear the bang when a spring broke, there are several other ways to determine if you need a new garage door spring. Sure signs that the spring needs attention include a door that closes too fast or is excessively loud or crooked. Some signs occur more slowly, like rust and corrosion caused by the spring not staying lubricated enough. Here are the top ways to know if your garage door spring needs replacing.

Metal parts tend to squeak when they rub together or when they’re out of alignment. In the case of a garage door spring, squeaking indicates that the spring may need some lubrication and cleaning. A garage door maintenance specialist can look at the spring during a tune-up to make sure it’s in good working order.

You’ll know pretty quickly when something serious has gone wrong with your garage door springs. If any of these situations apply, call a technician to get the springs repaired:

If a homeowner uses the garage door several times throughout the day, the spring will wear out faster than if the door is used only once or twice per day. Heavy garage door use is a good reason to have regular tune-ups to extend a garage door’s life. Homeowners can also opt to install springs that have a higher cycle rate than others. One quick way to check the springs’ health is to raise the door halfway, then see if it holds level. If it continues to move or only one side keeps moving, the springs are heading for replacement.

Springs that come into contact with any moisture will rust quickly, which weakens the material. Since springs are under constant high pressure, any weakening immediately speeds up the replacement process. Keep springs protected from moisture by lubricating them yearly with a silicone-based lubricant or WD-40 White Lithium Grease, which won’t harm the coils like regular WD-40. Just make sure not to over-lubricate them; they shouldn’t be so slippery that they can’t maintain their coil. For high-humidity or coastal areas, garage door springs could also benefit from regular tune-ups.

When your garage door suddenly doesn’t work correctly, visions of costly repairs come to mind. You might even worry that you’re looking at a total garage door replacement. Fortunately, a broken spring is the most common culprit for a faulty garage door, and replacing it is a simple task for an experienced pro.

On the other hand, extensive damage to a broken garage door may warrant a whole garage door replacement. Severe damage from strong weather or natural disasters could mean that a garage door is beyond repair. If a door fell off its track and broke on landing, it could also need to be replaced. In general, total replacement usually occurs when multiple parts of the garage door need repair or replacement. If your garage door is paneled, a technician may be able to repair the one or two damaged panels. But when the entire door, tracks, and cables are damaged, the whole garage door will need replacing. Additionally, you could opt to have a garage door replaced if you want a different type of door or if you want to add windows for more natural light or insulation for cold winters.

Garage doors may look like they’re easy to repair since they’re simple to operate, but that’s not the case. Garage door springs remain under constant intense pressure to lift a heavy door. Because of that, repairing them can be a dangerous undertaking. Repairing a garage door on your own could lead to seriously injuring yourself or damaging any vehicles or equipment in the garage. You could also repair the wrong thing or do it incorrectly and cause a costlier problem. Garage door spring replacement should be left to a trained professional.

The safest and surest route to garage door spring replacement is to ask for help from qualified technicians who have been trained to remove and replace broken springs. These are not your common household springs, so they also require special tools. Once the technician has removed and replaced the broken springs, the next step is to make sure the door is balanced correctly. If you’re unfamiliar with this process, you could end up damaging your door, forcing a need to replace the entire garage door. And as one final reason to use a pro, some warranties will not cover repairs or new parts if the work is done by someone other than a licensed professional.

Though garage door spring replacement costs aren’t the most expensive repair you could face, it never hurts to save a little money on repairs. Use any of the following tips to find ways to lower the cost of replacing garage door springs.

It never hurts to have as much information as possible when hiring a pro to make repairs on your behalf. Even if you aren’t taking on this task yourself, you should ask several questions to ensure you’re hiring a qualified garage door repair company. It’s essential to understand the costs, expectations, and steps to get your door back on track.

Understanding garage door spring replacement costs doesn’t have to be complicated since the fees are pretty straightforward. For a little additional information, read through these frequently asked questions and answers.

Technically, yes. There are kits available for homeowners to do their own garage door spring replacement. But be aware that this is not advised since there’s a high risk of injury or even death when working with springs under extreme pressure. Without the right tools and experience, you could find yourself in an unfortunate circumstance with a personal injury or damage to vehicles or equipment inside the garage.

It depends on the type of spring you have. Torsion springs should last 8 to 15 years, and extension springs should last 7 to 12 years. With proper maintenance, most springs can last their entire lifespan.

Keeping your springs lubricated is a good idea to prevent rusting or drying out. Both can cause the spring to wear out more quickly. Be sure to use a silicone-based lubricant if you do it independently, or have a technician do a complete tune-up with the right tools.

Disclosure: BobVila.com participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for publishers to earn fees by linking to Amazon.com and affiliated sites.

You agree that BobVila.com may process your data in the manner described by our Privacy Policy.

Copyright © 2022 Acton Media Inc. All rights reserved.